High temperature nanoindentation of (U,Ce)O compounds

Frazer, D.*; Saleh, T. A.*; Matsumoto, Taku; Hirooka, Shun; Kato, Masato; McClellan, K.*; White, J. T.*

Nuclear Engineering and Design, 423, p.113136_1 - 113136_7, 2024/07

https://doi.org/10.1016/j.nucengdes.2024.113136

Nanoindentation based techniques can be employed on minute volumes of material to measure mechanical properties, including Young's modulus, hardness, and creep stress exponents. In this study, (U,Ce)O solid solutions samples are used to develop elevated temperature nanoindentation and nanoindentation creep testing methods for use on mixed oxide fuels. Nanoindentation testing was performed on 3 separate (Ux-1,Cex)O compounds ranging from x equals 0.1 to 0.3 at up to 800 C: their Young's modulus, hardness, and creep stress exponents were evaluated. The Young's modulus decreases in the expected linear manner while the hardness decreases in the expected exponential manner. The nanoindentation creep experiments at 800 C give stress exponent values, n=4.7-6.9, that suggests dislocation motion as the deformation mechanism.

MAAP code analysis for the in-vessel phase of Fukushima-Daiichi Nuclear Power Station Unit 1 and comparison of the results among Units 1 to 3

Sato, Ikken; Yoshikawa, Shinji; Yamashita, Takuya; Shimomura, Kenta; Cibula, M.*; Mizokami, Shinya*

Nuclear Engineering and Design, 422, p.113088_1 - 113088_24, 2024/06

https://doi.org/10.1016/j.nucengdes.2024.113088

Experimental investigation on local flow structures of upward cap-bubbly flows in a vertical large-size square channel

Sun, Haomin; Kunugi, Tomoaki*; Yokomine, Takehiko*; Shen, X.*; Hibiki, Takashi*

Experimental Thermal and Fluid Science, 154, p.111171_1 - 111171_24, 2024/05

https://doi.org/10.1016/j.expthermflusci.2024.111171

A Science-based mixed oxide property model for developing advanced oxide nuclear fuels

Kato, Masato; Oki, Takumi; Watanabe, Masashi; Hirooka, Shun; Vauchy, R.; Ozawa, Takayuki; Uwaba, Tomoyuki; Ikusawa, Yoshihisa; Nakamura, Hiroki; Machida, Masahiko

Journal of the American Ceramic Society, 107(5), p.2998 - 3011, 2024/05

https://doi.org/10.1111/jace.19609

Development of a practical tritiated water monitor to supervise the discharge of treated water from Fukushima Daiichi Nuclear Power Plant

Sanada, Yukihisa; Oshikiri, Keisuke*; Kanno, Marina*; Abe, Tomohisa

Nuclear Instruments and Methods in Physics Research A, 1062, p.169208_1 - 169208_7, 2024/05

https://doi.org/10.1016/j.nima.2024.169208

As part of the decommissioning work at the Fukushima Daiichi Nuclear Power Plant (FDNPP), the release of stored treated water began in 2023. In this study, we developed a practical tritium monitor to continuously monitor the concentration of tritiated water, as confirmed by batch sampling measurements at the FDNPP. The monitor is arranged with a flow cell detector comprising inexpensive plastic scintillator pellets and incorporating simultaneous measurements by three detectors, a veto detector, and lead shielding to reduce the influence of environmental -rays. The system reached a detection limit of 911 Bq L-1 with a measurement time of 30 min, which is lower than the discharge standard for tritiated water of 1,500 Bq L-1. The system can also qualitatively distinguish the presence of disturbances due to interfering radionuclides other than tritium or background radiation using the -ray spectrum.

Determination of Sr in highly radioactive aqueous samples via conversion to a kinetically stable 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid complex followed by concentration-separation-fractionation based on capillary electrophoresis-liquid scintillation

Ouchi, Kazuki; Haraga, Tomoko; Hirose, Kazuki*; Kurosawa, Yuika*; Sato, Yoshiyuki; Shibukawa, Masami*; Saito, Shingo*

Analytica Chimica Acta, 1298, p.342399_1 - 342399_7, 2024/04

https://doi.org/10.1016/j.aca.2024.342399

Given that conventional methods of high-dose sample analysis pose substantial exposure risks and generate large amounts of secondary radioactive waste, faster procedures allowing for decreased radiation emission are highly desirable. To address this need, we developed a Sr quantitation technique that is based on liquid scintillation counting-coupled capillary transient isotachophoresis (ctITP) with two-point detection and relies on the rapid concentration, separation, and fractionation of 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (DOTA)-complexed Sr in a single run. This method, which allows for the handling of high-dose radioactive specimens at the microliter level and is substantially faster than conventional ion-exchange protocols, was used to selectively quantify Sr in real high-dose waste. The successful concentration-separation in ctITP was ascribed to the inertness of the Sr-DOTA complex to dissociation.

Estimating the corrosion rate of stainless steel R-SUS304ULC in nitric acid media under concentrating operation

Irisawa, Eriko; Kato, Chiaki

Journal of Nuclear Materials, 591, p.154914_1 - 154914_10, 2024/04

https://doi.org/10.1016/j.jnucmat.2024.154914

The amount of corrosion of austenitic stainless-steel R-SUS304ULC was evaluated considering the changes in solution composition and boiling during actual concentration operations. Austenitic stainless-steel R-SUS304ULC is the structural material of the highly radioactive liquid waste concentrator in Japanese spent fuel reprocessing plant, which treats highly corrosive nitric acid solutions during enrichment operations. The study results show that it is necessary to focus on nitric acid concentrations, oxidizing metal ion concentrations, and decompression boiling as factors that accelerate the corrosion rate of stainless steel because of cathodic reaction activation.

Report on the lecture of standard committee in the 2023 fall meeting entitled "Standardization Activities for Safe Long Term Operation"

Murakami, Kenta*; Onizawa, Kunio; Yamamoto, Akio*

Nihon Genshiryoku Gakkai-Shi ATOMO, 66(4), p.199 - 202, 2024/04

https://doi.org/10.3327/jaesjb.66.4_199

The Standards Committee of Atomic Energy Society of Japan has been leading activities related to long-term operation through the revision of the Code of Practice for Aging Management, and we believe that we must continue to make important contributions in light of recent changes in laws and regulations. This paper recapitulates the discussions in the special session conducted at the 2023 fall meeting, and describes the efforts toward safe long-term operation and the points to keep in mind in the standardization of such activities. The important points are (1) to make effective use of knowledge found over time, (2) not to overlook new knowledge that has a significant impact on safety, including obsolescence, (3) to assign a level of importance to the response based on the impact on safety and the likelihood of its occurrence, and (4) to contribute to the establishment of an international knowledge base.

Radiation monitoring via manned helicopter around the nuclear power station in the fiscal year 2022 (Contract research)

Futemma, Akira; Sanada, Yukihisa; Nagakubo, Azusa; Kawasaki, Yoshiharu*; Iwai, Takeyuki*; Hiraga, Shogo*; Haginoya, Masashi*; Matsunaga, Yuki*; Akutsu, Yuichiro*; Arai, Yoshinori*; et al.

JAEA-Technology 2023-027, 146 Pages, 2024/03

JAEA-Technology-2023-027.pdf:18.12MB

By the accident at Tokyo Electric Power Company's (TEPCO's) Fukushima Daiichi Nuclear Power Station (FDNPS), caused by tsunami triggered by the 2011 off the Pacific coast of Tohoku Earthquake, a large amount of radioactive material was released into the surrounding environment. After the accident, Airborne Radiation Monitoring (ARM) via manned helicopter has been applied as a method to quickly and extensively measure the distribution of radiation. Japan Atomic Energy Agency (JAEA) has continuously conducted ARM via manned helicopter around FDNPS. In this report, we summarize the results of the ARM around FDNPS in the fiscal year 2022, evaluate the changes of ambient dose rates and other parameters based on the comparison to the past ARM results, and discuss the causes of such changes. In order to contribute to improve the accuracy of ambient dose rate conversion, we analyzed the ARM data taking into account undulating topography, and evaluated the effect of this method. Furthermore, the effect of radon progenies in the air on the ARM was evaluated by applying the discrimination method to the measurement results.

Investigations on distribution of radioactive substances owing to the Fukushima Daiichi Nuclear Power Station Accident in the fiscal year 2022 (Contract research)

Group for Fukushima Mapping Project

JAEA-Technology 2023-024, 176 Pages, 2024/03

JAEA-Technology-2023-024.pdf:22.16MB

This report presents results of the investigations on the distribution-mapping project of radioactive substances owing to TEPCO Fukushima Daiichi Nuclear Power Station (FDNPS) conducted in FY2022. Car-borne surveys, a measurement using survey meters, a walk survey and an unmanned helicopter survey were carried out to obtain air dose rate data to create their distribution maps, and temporal changes of the air dose rates were analyzed. Surveys on depth profile of radiocesium and in-situ measurements as for radiocesium deposition were performed. Based on these measurement results, effective half-lives of the temporal changes in the air dose rates and the deposition were evaluated. Score maps to classify the importance of the measurement points were created, and the factors causing changes in the score when monitoring data from multiple years were used were discussed. The range of fluctuation of past tritium concentration data in seawater was determined, and the causes of the fluctuation were discussed. Monitoring data in coastal area performed in 2022 owing to the comprehensive radiation monitoring plan was summarized, and temporal changes in cesium-137 were analyzed. Using the Bayesian hierarchical modeling approach, we obtained maps that integrated air dose rate distribution data acquired through surveys such as car-borne and walk surveys with respect to the region within 80 km from the FDNPS and Fukushima Prefecture. The measurement results for FY2022 were published on the "Database for Radioactive Substance Monitoring Data", and measurement data were stored as CSV format. Radiation monitoring and analysis of environmental samples owing to the comprehensive radiation monitoring plan were carried out.